GFR equilibrium cycle analysis with the EQL3D procedure

Abstract

Advanced fast reactors of the fourth generation should be capable to breed their own fuel from 238U feed and to recycle the actinides from their own spent fuel. This recycling or virtually the closure of fuel cycle can converge to an equilibrium fuel cycle and has impact on the safety-related parameters. The goals of this study are: (i) to apply an equilibrium cycle procedure EQL3D to the Gas cooled Fast Reactor (GFR), (ii) to simulate and confirm the GFR neutronics capability for closed fuel cycle, and (iii) to evaluate the safety-related parameters of the equilibrium cycle. Equilibrium cycle method for considering the homogeneous recycling of actinides is a known approach. However, in EQL3D the equilibrium method is newly applied for hexagonal-z 3D core geometry and 33 energy-groups neutron-flux calculation. This geometry enables to characterize the equilibrium cycle for complex reloading patterns within a multi-batch cycle. Two GFR geometries were studied, the first based on an international neutronics benchmark with a simple set-up and the second based on more advanced core design. For the advanced design, three reloading patterns within a multi-batch cycle with four different feeds were compared. The GFR neutronics capability for closed cycle was proved. The negative impact of the fuel cycle closure on safety-related parameters was confirmed and quantified. The GFR core with closed fuel cycle could serve after prospective optimization as a sustainable and clean energy source.