Gesture Controlled Robot using Arduino

Abstract

A Gesture Controlled Car is a robot that can be controlled with a simple human touch. The user only needs to wear a touch device where the sensor is installed. The sensor will record the movement of the hand in a certain direction that will lead to the movement of the robot in the right places. The robot and the touch device are connected wirelessly with radio waves. The user can communicate with the robot in a very friendly way due to wireless communication. We can control the car using accelerometer sensors that are connected to our hand glove. Sensors are designed to replace the remote control commonly used to drive a car. It will allow the user to control the forward, backward, left and right, while using the same accelerometer sensor to control the car's steering wheel. The movement of the car is controlled by the separation method. The machine involves rotating both front and rear wheels on the left or right side to move the non-clockwise side and another pair around the clock causing the car to rotate with its axis without going forward or backward. The main advantage of this machine is that the car with this method can take sharp turns without difficulty. The design and use of a robotic control arm using a flex sensor is suggested. The robot arm is designed to consist of four moving fingers, each with three connectors, an opposing thumb, a round wrist, and an elbow. The robot arm is designed to mimic the movements of a human hand using a hand glove.