Abstract
A comparative study was performed to assess the gate length effect on trapping properties in AlGaN/GaN metal-oxide-semiconductor channel high-electron-mobility transistors. Deep level transient spectroscopy and electrical simulations were used to investigate the deep levels response in two devices with the same gate surface area but with gate lengths of 15 and 1 μm. Results reveal that the repartition of equipotential lines depends on the gate length and impacts trapping phenomena. We demonstrated that the concentration of the defects localized beneath the gate electrode and associated with etching induced damage is reduced with a short gate length. Furthermore, for a negative gate voltage, the depletion region is less extended toward the buffer layers with a gate length of 1 μm, meaning that the trapping effects are reduced. Finally, this work indicates that it is better to design transistors with a short gate length to moderate the effect of trapping phenomena.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.