Abstract
The bidirectional reflectance distribution function (BRDF) and the bidirectional scattering - surface reflectance distribution function (BSSRDF), which relate radiance at the surface to irradiance and radiant flux, respectively, are regarded as the most fundamental scattering quantities used to determine the reflectance of objects. However, for materials where the optical radiation is transmitted under the surface, this radiance depends not only on irradiance and radiant flux, but also on the size of the irradiated area of the surface. This article provides insight into such dependence under the special condition in which the radiance is evaluated within the irradiated area and, consequently, is produced by both the insurface reflection and the subsurface scattering, in contrast to the situation in which the radiance is evaluated at non-irradiated areas and only subsurface scattering contributes. By explicitly considering both contributions, two other scattering quantities are defined: one that accounts exclusively for the insurface reflection and the other that accounts for subsurface scattering. In this regard, these quantities might be considered more fundamental than the BRDF and the BSSRDF, although they are coincident with these two functions apart from the above-mentioned special condition and for materials with negligible subsurface scattering. In this work, the relevance of the proposed scattering quantities is supported by experimental data, practical considerations are given for measuring them, and their relation to the bidirectional transmittance distribution function (BTDF) is discussed.
Highlights
According to the CIE International Lighting Vocabulary (ILV) [1], reflectance is defined as “the ratio of the reflected radiant flux or luminous flux to the incident flux in the given conditions”, while transmittance is defined as “the ratio of the transmitted radiant flux or luminous flux to the incident flux in the given conditions”
The bidirectional reflectance distribution function (BRDF) and the bidirectional scattering - surface reflectance distribution function (BSSRDF), which relate radiance at the surface to irradiance and radiant flux, respectively, are regarded as the most fundamental scattering quantities used to determine the reflectance of objects
This article provides insight into such dependence under the special condition in which the radiance is evaluated within the irradiated area and, is produced by both the insurface reflection and the subsurface scattering, in contrast to the situation in which the radiance is evaluated at non-irradiated areas and only subsurface scattering contributes
Summary
According to the CIE International Lighting Vocabulary (ILV) [1], reflectance is defined as “the ratio of the reflected radiant flux or luminous flux to the incident flux in the given conditions”, while transmittance is defined as “the ratio of the transmitted radiant flux or luminous flux to the incident flux in the given conditions”. Both quantities describe the interaction of the radiant flux (Φi) with the objects, but for given conditions. Many other quantities might be defined, that would provide very different results, making the measurement of reflectance and transmittance in given conditions far from being a general characterization of the interaction of the radiant flux with objects
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.