Abstract
An experimental study has been made to compare the frictional resistance of several ship hull coatings in the unfouled, fouled, and cleaned conditions. Hydrodynamic tests were completed in a towing tank using a flat plate test fixture towed at a Reynolds number ReL range of 2.8×106-5.5×106 based on the plate length and towing velocity. The results indicate little difference in frictional resistance coefficient CF among the coatings in the unfouled condition. Significant differences were observed after 287 days of marine exposure, with the silicone antifouling coatings showing the largest increases in CF. While several of the surfaces returned to near their unfouled resistance after cleaning, coating damage led to significant increases in CF for other coatings. The roughness function ΔU+ for the unfouled coatings showed reasonable collapse to a Colebrook-type roughness function when the centerline average height k=0.17Ra was used as the roughness length scale. Excellent collapse of the roughness function for the barnacle fouled surfaces was obtained using a new roughness length scale based on the barnacle height and percent coverage.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
