Abstract
Ni-based alloys are being widely used to improve the wear resistance of various industrial components in normal and severe environments and addition of rare earth elements to these alloys further improves the various mechanical and tribological properties of the coatings. In the present work, commercially available MEC 86 (NiCrBSi/WC–Co = 65/35) powder was modified with the optimum addition of 0.4 wt.% La2O3. The coatings were deposited by high velocity oxy-fuel (HVOF) spraying process. Rare earth addition refines the microstructure and increases the microhardness of the coatings. The increase in microhardness with the addition of La2O3 is approximately 22%. Sliding wear resistance of the coating modified with La2O3 is higher than of that without La2O3. The average wear resistance increases by approximately 14%. Further, the addition of La2O3 to the coating reduces the friction coefficient as compared to the one without the rare earth element. The coefficient of friction was found lower with the addition of La2O3, which is approximately 18%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
