Abstract
A frequency domain electromagnetic (FDEM) and ground penetrating radar (GPR) study was conducted on an ephemeral stream in north-central Texas to determine if FDEM and GPR measurements can be combined to determine the electrical characteristics of current and ancient stream channels. GPR data were collected at several frequencies to image sedimentary structures of different scale lengths, and to determine the formation porosity and water content of stream sediments. FDEM measurements were collected using Geonics EM31 and EM34 loop–loop instruments on a profile along the current stream channel and five profiles perpendicular to the channel. The results indicate that the greater spatial resolution of the EM31 mapped the current and possible ancient channels better than the EM34, however, the EM34 provided depth information on the formations underlying the channel sediments that the EM31 could not image. GPR measurements taken along a point bar deposit with 200, 100 and 25 MHz antennae indicated that the higher frequency antenna better resolved channel structures including laminar bedding, trough scours and cross-bedding, however, lower frequency antenna (25 MHz) imaged sedimentary structures within the underlying channel sediments. Common midpoint GPR measurements collected along the point bar deposit were used to estimate the sediment formation porosity (26%) and the water content, during a dry period, of the unsaturated (12%) and saturated (26 or 100% of the pore space) sediments. The combined results indicated that the FDEM data should be collected first because of the speed and ease of measurements. The FDEM data (especially the EM31) pointed to the locations of possible sedimentary structures, which can then be resolved by using different frequency GPR measurements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.