Abstract
The free vibration of thin cylinders with elastic boundary conditions was analysed by application of the exact solution of the Flügge shell theory equations of motion. The elastic boundaries were represented by distributed linear springs. By varying the eight spring constants any elastic or ideal boundary conditions can be simulated. The effect of flexibility in the boundary conditions for a cylinder supported at both ends and a cylinder supported at one end was determined for the lowest frequency vibration mode with two circumferential wavelengths as this mode is used in vibratory gyroscopes. It was found that the tangential stiffness has the greatest effect on the natural frequency of the cylinder supported at both ends while the axial boundary stiffness has the greatest influence on the natural frequency of the cylinder supported at one end. The effect of low rotation rates was also determined for these boundary conditions. It was found that the tangential stiffness of the boundaries has the largest effect on the sensitivity to rotation. The lowest frequency vibration mode with four circumferential wavelengths did not show the same trends. A range of boundary stiffnesses for which analysis as an elastic boundary is essential was determined. Boundary stiffnesses out of this range may be regarded as zero (free) or infinite (rigid).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.