Abstract
This paper presents a numerical study on the web-crippling failure of pultruded glass fibre reinforced polymer (GFRP) profiles, under external-two-flange (ETF) and internal-two-flange (ITF) configurations. The numerical study is validated through experimental tests recently conducted by the authors on four I-section profiles and one U-section profile, obtained from four different suppliers. These web-crippling tests were simulated through shell finite element (FE) models where the transverse compressive fracture toughness of each GFRP material was implemented as a damage evolution parameter. In order to quantify the influence of material damage and instability effects on the web-crippling failure, three different analyses were implemented, accounting for (i) material damage, (ii) instability, and (iii) both effects. The results obtained through the analysis accounting for both material damage and instability effects showed a good agreement with experimental results, in terms of stiffness, failure modes and ultimate loads; moreover, the transverse compressive strain distributions obtained from the numerical models also agreed well with experimental results. Finally, the transverse compressive stresses were found to influence web-crippling the most, regarding both damage initiation and ultimate load stages.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
