Abstract
This paper proposes forward error correcting (FEC) code for synchronous digital hierarchy (SDH) fiber optical transmission systems. They are (18880, 18865) and (2370, 2358) shortened Hamming codes and are encoded at the multiplex-section layer; the check bits are embedded in auxiliary multiplex-section overhead (MSOH) bytes. The codes realize general circuit configurations regardless of the transmission speed or path-size, perfect compatibility with SDH format, suppressed processing delay accumulation, and decrease the chance of line-switching in the case of signal degradation. To ensure that the various requirements of each network-provider such as customized usage of SOH bytes and affordable circuit scale could be satisfied, a trial circuit board was constructed on the programmable hardware called PROTEUS, which enables flexible operation in terms of code-selection and check bit area. We actually confirm error-correcting capability through the first STM-64 FEC-coded-optical transmission experiment. The statistics of error occurrence in the optical transmission line are also studied. The result indicates that the proposed codes are effective in optical transmission systems if the BER is limited by optical noise and dispersion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
