Formation of surface layer based on Al 3Ti on aluminum by laser cladding and its compatibility with ceramics

Abstract

Intermetallic compound Al 3Ti or intermetallic compound matrix composite (IMC) surface layers were formed on Al surface by laser cladding. To form sound IMC surface layers, laser conditions must be controlled to suppress the melting of base metal. With increasing the volume fraction of ceramics in the IMC layer, it needed higher laser power to obtain IMC layer although the control of laser conditions became easier. During laser cladding, TiB 2 melted by laser irradiation and then homogeneously precipitated as fine particles at a cooling stage. On the contrary, TiC and SiC hardly melted and were dispersed in Al 3Ti matrix. SiC reacted with Ti to form titanium-silicide or TiC, which made the composition of matrix richer in Al than Al 3Ti and caused degradation of the wear property. IMC surface layer improved the wear property of Al substrate. The particle size as well as volume fraction of dispersoid ceramics affected the wear property.