Formation of ohmic contacts to p-ZnTe

Abstract

Formation and temperature stability of sputter deposited gold ohmic contacts to molecular beam epitaxially grown p-type ZnTe (doped with nitrogen to a free hole concentration of ≈3 × 1018 cm3) have been studied using current-voltage (I-V), Auger electron spectroscopy, secondary ion mass spectrometry, and optical and scanning electron microscopy. The I-V characteristics of ≈1500A Au/p-ZnTe contacts were measured as-deposited and after heat treatments at 150, 200, 250, and 350°C for 15 min intervals up to 90 min. As deposited, the contacts were poor Schottky contacts, but became ohmic after 15 min at all temperatures. There was an increased resistance at t>15 min for T≤250°C, and a very large resistance increase upon heat treatment for all times at 350°C. The interface between the metallization and ZnTe was initially very planar, and remained planar upon formation of the ohmic contact. Upon heating at T>250°C, Au diffused into ZnTe. The ohmic behavior of the Au/p-ZnTe contacts is attributed to this diffusion which created a highly doped near-surface region in the ZnTe. Microscopy showed that Au also migrated across the ZnTe surface forming an extended reaction zone (≈100 μm) around the dot contact at T≥250°C.