Formation and Distribution of Different Pore Types in the Lacustrine Calcareous Shale: Insights from XRD, FE-SEM, and Low-Pressure Nitrogen Adsorption Analyses.

Abstract

Pore types and pore structure parameters are the important factors affecting the storage capacity of a shale oil reservoir. Pore morphology and mineralogical composition of shales have diverse effects on the upgrading of various phases of shale oil. To interpret the formation and distribution of different pore types and their structure parameters in the lacustrine calcareous shale, a combination of polarizing microscopy, X-ray diffraction, total organic carbon (TOC), field-emission scanning electron microscopy, and low-pressure nitrogen adsorption experiments were conducted on the Es3x shale of the Eocene Shahejie Formation in the Zhanhua Depression. The interpretations regarding pore types, pore structure parameters, and pore size distribution indicate that the pore morphology and pore size distribution in the lacustrine shale are very complicated and demonstrate strong heterogenic behavior. Inorganic pores (interparticle pores, intraparticle pores, intercrystalline pores, dissolution pores, and microfractures) are the most commonly distributed pore types in the studied shale. However, organic matter pores are poorly developed due to the lower thermal maturity of the Es3x shale. The Brunauer–Emmett–Teller specific surface and pore volume range from 0.026 to 1.282 m2/g (average 0.697 m2/g) and 0.003 to 0.008 cm3/g (average 0.005 cm3/g), respectively. The shape of the pores varies from slit-like to narrow slit. Different minerals develop different types of pores with various sizes extending from micropores (<2 nm), mesopores (2–50 nm), to macropores (>50 nm). The relationship between mineral components and pore parameters indicates that the carbonate minerals act as the main contributors to the formation and distribution of different pore types in the studied shale. Pore volume and the pore specific surface area did not show a good relationship with mineral composition and TOC due to disordered pores, but pore size shows a good relationship with mineral composition and TOC of the Es3x shale. The whole pore system description showed that the mesopores and macropores are abundantly distributed and are the main contributors to the pore system in the Es3x shale. A comprehensive understanding of the formation mechanism and structural features of various sized pores in a variety of different minerals can provide a good tool for the exploration and development of shale oil reservoirs.