Abstract
In pumped-storage reservoirs, turbulent kinetic energy input from plant operation can be considerably high. Flow velocities were measured by Acoustic Doppler Current Profilers near the intake/outlet structure to describe flow patterns induced by pumped-storage operation in an Alpine reservoir. Recorded data allowed reproducing 1D and 2D velocity profiles along the water column. The comparison between the main frequencies of the velocity signal and the discharge series from the plant reveals correlation between recorded flow patterns and pumped-storage operation. Numerical modeling enhanced the understanding of flow patterns developing near the intake/outlet structure. Both results reveal that water withdrawal by pumping only marginally affects flow patterns in front of the intake, whereas water injected during turbine mode leads to backflow areas and large-scale recirculation cells. Numerical modeling further revealed that steady flow patterns are developing only after some 2.5 h of continuous turbine operation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
