Abstract
BackgroundProximal tibia fractures are one of the most familiar fractures. Surgical approaches are usually needed for anatomical reduction. However, no single treatment method has been widely established as the standard care. Our present study aims to compare the stress and stability of intramedullary nails (IMN) fixation and double locking plate (DLP) fixation in the treatment of extra-articular proximal tibial fractures.MethodsA three-dimensional (3D) finite element model of the extra-articular proximal tibial fracture, whose 2-cm bone gap began 7 cm from the tibial plateau articular surface, was created fixed by different fixation implants. The axial compressive load on an adult knee during single-limb stance was imitated by an axial force of 2500 N with a distribution of 60% to the medial compartment, while the distal end was fixed effectively. The equivalent von Mises stress and displacement of the model was used as the output measures for analysis.ResultsThe maximal equivalent von Mises stress value of the system in the IMN model was 293.23 MPa, which was higher comparing against that in the DLP fixation model (147.04 MPa). And the mean stress of the model in the IMN model (9.25 MPa) was higher than that of the DLP fixation system in terms of equivalent von Mises stress (EVMS) (P < 0.0001). The maximal value of displacement (sum) in the IMN system was 8.82 mm, which was lower than that in the DLP fixation system (9.48 mm).ConclusionsThis study demonstrated that the stability provided by the locking plate fixation system was superior to the intramedullary nails fixation system and served as an alternative fixation for the extra-articular proximal tibial fractures of young patients.
Highlights
Proximal tibia fractures are one of the most familiar fractures
Proximal tibia fractures, which account for approximately 5–11% of all fractures of the tibia [1], are one of the most familiar fractures among all the long bone fractures
The anatomy and surrounding soft tissues of the proximal tibia presents several exclusive treatment challenges for these injuries, and currently no single treatment method has been widely established as the standard care
Summary
Proximal tibia fractures are one of the most familiar fractures. Surgical approaches are usually needed for anatomical reduction. Our present study aims to compare the stress and stability of intramedullary nails (IMN) fixation and double locking plate (DLP) fixation in the treatment of extra-articular proximal tibial fractures. To maintain anatomical reduction and prevent the devastating complications, surgical approaches are usually needed [2]. Intramedullary nailing and locking plate osteosynthesis are the two most frequently used surgical methods of treatment for extra-articular proximal tibia fractures [3, 4]. Each of these options has its own advantages and relevant complications [2]. The comparative biomechanics analysis, has not been demonstrated computationally between these two different methods
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
