Abstract
This paper presents the findings of a research study to determine the benefits of fiber-reinforced asphalt mixtures used to mitigate distresses observed in the field. Control asphalt mixture test sections were constructed on US-30 in Idaho, along with fiber-reinforced asphalt mixture test sections. Three types of fibers were evaluated: Fiber 1 (i.e., aramid and polyolefin fiber), Fiber 2 (i.e., wax-treated aramid fiber), and Fiber 3 (i.e., glass fiber). Several laboratory tests were conducted on laboratory-prepared test samples and extracted field cores. The laboratory tests included dynamic modulus, flow number, Hamburg wheel-track test, indirect tensile test, creep compliance, and semicircular bending, in addition to performance evaluation with AASHTOWare Pavement ME Design software. The laboratory results showed no significant improvement to the properties of asphalt mixtures at the fiber content recommended by the manufacturer. However, the performance of asphalt mixtures did improve at a fiber dosage higher than the one recommended by the manufacturer. This study demonstrated the need to evaluate different fiber contents when asphalt mixtures are designed, because the dosage recommended by the manufacturer may not be optimal for various asphalt mixtures.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Transportation Research Record: Journal of the Transportation Research Board
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
