Abstract
Five biomasses spruce (Picea abies L.), beech (Fagus sylvatica L.), iroko (Chlophora excelsa L.), albizia (Albizia adianthifolia L.), and corncob (Zea mays ssp.) have been subjected to analytical pyrolysis (Py-GC/MS) and bench-scale pyrolysis with a fluidized bed reactor at 470 °C. The comparison of Py-GC/MS and bench scale results revealed only small differences in the relative concentration of single products mainly acetic acid, hydroxyacetaldehyde, hydroxypropanone, and lignin-derived guaiacyl and syringyl components. For European woods, organic oil yields were approximately 57%, whereas African biomasses yielded between 41 and 48% because of their higher mineral contents. The analysis of bio-oil composition revealed no significant differences between African and European biomasses. Acetic acid, hydroxyacetaldehyde, hydroxypropanone, and levoglucosan were found to be the largest individual components in the volatiles. Bio-oil from corncob, having the lowest lignin content contained high concentration o...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.