Abstract
Micro-lenses in quartz and BaF2 are fabricated using a one step technique which utilizes Laser Induced Backside Wet Etching and the projection of a Diffractive Gray Tone Phase Mask. The structuring of quartz and BaF2 is achieved using 308 nm irradiation and laser fluences well below the ablation threshold of these materials. The key element in this process is an organic liquid which is in contact with the quartz or BaF2 substrate. The strong absorption of the laser light in a thin liquid layer at the substrate interface results in the creation of high temperature and pressure jumps, which are the key elements in the etching process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.