Abstract
This paper reports the fabrication process of wafer bonded capacitive micromachined ultrasonic transducers (CMUTs) using photosensitive benzocyclobutene as a polymer adhesive. Compared with direct bonding and anodic bonding, polymer adhesive bonding provides good tolerance to wafer surface defects and contamination. In addition, the low process temperature of 250 °C is compatible with standard CMOS processes. Single-element CMUTs consisting of cells with a diameter of 46 µm and a cavity depth of 323 nm were fabricated. In-air and immersion acoustic characterizations were performed on the fabricated CMUTs, demonstrating their capability for transmitting and receiving ultrasound signals. An in-air resonance frequency of 5.47 MHz was measured by a vibrometer under a bias voltage of 300 V.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
