Abstract
A method for directly bonding thermoelectric elements onto copper electrodes without applying a solder paste was developed in this study. A tin coating of thickness approximately 50 μm was deposited via electroplating onto the surface of a Bi₂Te₃-based thermoelectric element, which had a nickel diffusion barrier layer. The resulting structure was subsequently subjected to direct thermocompression bonding at 250 °C on a hotplate for 3 min at a pressure of 1.1 kPa. Scanning electron microscopy imaging confirmed that a strong and uniform bond was formed at the copper electrode-thermoelectric element interface, and the melted or solidified tin layer remained defect-free. The thermoelectric module fabricated using tin plating had an average bonding strength similar to that fabricated using soldering.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
