Abstract
Glass‐ceramic fibers containing Cr3+‐doped ZnAl2O4 nanocrystals were fabricated by the melt‐in‐tube method and successive heat treatment. The obtained fibers were characterized by electro‐probe micro‐analyzer, X‐ray diffraction, Raman spectrum and high‐resolution transmission electron microscopy. In our process, fibers were precursor at the drawing temperature where the fiber core glass was melted while the clad was softened. No obvious element interdiffusion between the core and the clad section or crystallization was observed in precursor fiber. After heat treatment, ZnAl2O4 nanocrystals with diameters ranging from 1.0 to 6.3 nm were precipitated in the fiber core. In comparison to precursor fiber, the glass‐ceramic fiber exhibits broadband emission from Cr3+ when excited at 532 nm, making Cr3+‐doped glass‐ceramic fiber a promising material for broadband tunable fiber laser. Furthermore, the melt‐in‐tube method demonstrated here may open a new gate toward the fabrication of novel glass‐ceramic fibers.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
