Extracting non-equilibrium material properties in visco-hyperelastic polymers based on analytical stress solution

Abstract

This study extracts non-equilibrium material properties in the visco-hyperelastic polymers using an analytical stress solution. At first, the analytical stress solution of visco-hyperelastic polymers is obtained from finite-strain creep test data based on the generalized Maxwell’s rheological model. The solution uses the low-computational-cost exponential generalized pseudospectral method and analytically brings the stress components in terms of time and unknown non-equilibrium material properties of Maxwell’s elements. The solution invokes the Ogden hyperelastic model for the elastic element of the generalized Maxwell’s model. The exponential generalized pseudospectral method, based on exponential–rational Lagrange functions suitable for the semi-infinite time interval [Formula: see text] and the rational Chebyshev roots as the collocation points, is applied to derive the stress components. The non-equilibrium properties are derived by minimizing a residual, which is obtained by making the derivatives of the residual in terms of the non-equilibrium properties as zero. Notably, the proposed analytical method requires a small number of exponent–rational Lagrange basis functions and collocation points. Besides, the proposed method does not require integration, discretization, or linearization. Two case studies are considered: the moderate-stretched ETFE polymer with the neo-Hookean model as the elastic element and the large-stretched rubber with the six-parameter Ogden hyperelastic model as the elastic branch. The results are validated using uniaxial creep modeling in ANSYS and available reports in the literature.