Abstract
This study was performed to assess exposure to and the risk caused by biphenyl in the workplace. Biphenyl is widely used as a heat transfer medium and as an emulsifier and polish in industry. Vapor or high levels of dust inhalation and dermal exposure to biphenyl can cause eye inflammation, irritation of respiratory organs, and permanent lesions in the liver and nervous system. In this study, the workplace environment concentrations were assessed as central tendency exposure and reasonable maximum exposure and were shown to be 0.03 and 0.12 mg/m3, respectively. In addition, the carcinogenic risk of biphenyl as determined by risk assessment was 0.14 × 10−4 (central tendency exposure) and 0.56 × 10−4 (reasonable maximum exposure), which is below the acceptable risk value of 1.0 × 10−4. Furthermore, the central tendency exposure and reasonable maximum exposure hazard quotients were 0.01 and 0.06 for oral toxicity, 0.05 and 0.23 for inhalation toxicity, and 0.08 and 0.39 for reproduction toxicity, respectively, which are all lower than the acceptable hazard quotient of 1.0. Therefore, exposure to biphenyl was found to be safe in current workplace environments. Because occupational exposure limits are based on socioeconomic assessment, they are generally higher than true values seen in toxicity experiments. Based on the results of exposure monitoring of biphenyl, the current occupational exposure limits in Korea could be reviewed.
Highlights
Biphenyl is used as an intermediate agent such as an emulsifier, polish, and protectant in various production activities
The present study investigated the exposure level of biphenyl for workers in workplaces in which the health risk assessment was conducted
To determine this value, quantified information provided by several agencies can be used; the reference concentration (RfC) or reference dose is provided by the US Environmental Protection Agency (EPA), and the derived no effect level is provided by the European
Summary
Biphenyl is used as an intermediate agent such as an emulsifier, polish, and protectant in various production activities. Regulatory target chemical selection and regulation in Korea has been mainly based on the introduction of foreign standards more than assessing risk using internal guidelines. As the chemical industry in Korea grows, applying a foreign standard is no longer the best method, and local standards are needed This is especially the case in cutting-edge industries in which Korea plays a leading role, such as electronics and nanotechnology. In such industries, a health risk assessment system is required to manage the use of chemicals. The present study investigated the exposure level of biphenyl for workers in workplaces in which the health risk assessment was conducted.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Environmental Research and Public Health
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.