Abstract
We experimentally study the electron overflow in InGaN/GaN blue light emitting diodes (LEDs) by measuring the electroluminescence (EL) emission spectra from p-type InGaN/GaN superlattices (SLs) adjacent to the quantum well (QW) active region. The integrated EL intensity ratio of the SL peak to quantum well peak was calculated to reveal the dependence of electron overflow from active region on current density. Our experimental results indicate that the electron overflow from the active region at both low and high current densities, and no saturation is observed even at the maximum current density (280 A/cm2) applied. It is found that both direct electron leakage and Auger assisted leakage contribute to the electron overflow. Further analyses reveal that at low current densities (less than 150 A/cm2) direct electron leakage dominates the mechanism for electron overflow, and simultaneously for efficiency droop, while electron overflow is mainly caused by Auger assisted leakage at high current density. These results identify the main mechanisms for efficiency droop of LEDs at different current density regimes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.