Abstract
The main aim of the study was to reduce carbon emissions in the atmosphere using a novel Andropogon narudus (AN) biofuel using higher air temperatures and reducing the consumption of conventional fossil fuel (diesel). The use of a heat exchange chamber within the air intake manifold is a popular method to reduce hydrocarbon (HC) and carbon monoxide (CO) emissions during cold starts. A premixed charged compression ignition engine in the dual-fuel mode was used in this study with raw diesel, raw AN oil, AN70+D30, AN80+D20, AN80+D20 (35 °C), AN80+D20 (40 °C), and AN80+D20 (45 °C). A chamber was designed and analyzed to measure the exit temperature and density change and to determine the reduction in volumetric efficiency of the engine, using Ansys Fluent software. A sustainability assessment study was performed to understand the feasibility of the fuel and the design using the Pugh Matrix. The fuel AN80+D20 with an air temperature of 45 °C was found to be superior to all other fuels in terms of brake thermal efficiency, reaching at 32.1%. D100 used the least amount of energy, whereas AN80+D20 used the most. Engine HC emission was at the lowest (45.01 ppm) for AN80+D20 fuel at 45 °C air input and reached the highest (50 ppm) for AN100 fuel. With an air temperature of 45 °C, CO emission was at its lowest for AN80+D20 gasoline (0.018%) and was at its highest for AN100 (0.072%). Nitrogen oxide emissions were the highest for AN80+D20 fuel with an air temperature of 45 °C, with an air concentration of 1254 ppm, whereas they were the lowest for AN100 (900 ppm). CO2 values were reduced, with D100 showing the lowest levels and AN100 showing the highest. The smoke emission was minimum for AN80+D20 fuel at 45 °C, with a smoke number of 15 compared to 33 for D100 fuel. As per the Pugh Matrix assessment, AN80+D20 with 35 °C air temperature had higher scores compared to all of the other fuel mixtures.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
