Abstract
A sodium–zinc sorbent based flue gas desulfurization technology (Na–Zn-FGD) was proposed based on the experiments and analyses of the thermal decomposition characteristics of CaSO3 and ZnSO3·2.5H2O, the waste products of calcium-based semi-dry and zinc-based flue gas desulfurization (Ca–SD-FGD and Zn–SD-FGD) technologies, respectively. It was found that ZnSO3·2.5H2O first lost crystal H2O at 100°C and then decomposed into SO2 and solid ZnO at 260°C in the air, while CaSO3 is oxidized at 450°C before it decomposed in the air. The experimental results confirm that Zn–SD-FGD technology is good for SO2 removal and recycling, but with problem in clogging and high operational cost. The proposed Na–Zn-FGD is clogging proof, and more cost-effective. In the new process, Na2CO3 is used to generate Na2SO3 for SO2 absorption, and the intermediate product NaHSO3 reacts with ZnO powders, producing ZnSO3·2.5H2O precipitate and Na2SO3 solution. The Na2SO3 solution is clogging proof, which is re-used for SO2 absorption. By thermal decomposition of ZnSO3·2.5H2O, ZnO is re-generated and SO2 with high purity is co-produced as well. The cycle consumes some amount of raw material Na2CO3 and a small amount of ZnO only. The newly proposed FGD technology could be a substitute of the traditional semi-dry FGD technologies.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
