Abstract
This article presents an experimental study on the screw connections between cold-formed steel walls and cement-based boards such as fibercement boards and ferrocement boards. The effect of loading direction, type of sheathing, board thickness, and screw number and spacing were investigated. Tests were performed under shear which is perpendicular to the free edge and also under shear which is parallel to the free edge of the board to simulate the actual behavior of sheathed shear walls. In each case, the peak load and displacement, elastic load and displacement, elastic stiffness and ductility were found and compared to other cases. The results of the 20 test reported in the paper showed that connection strength obtained under parallel loading was much higher than those obtained under perpendicular loading while as the displacements obtained under parallel loading were much larger than those obtained under perpendicular loading. Consequently, the elastic stiffness values were found to be smaller under parallel loading than under perpendicular loading. The results also showed that fibercement boards had much higher strength than ferrocement board, and that the screw strength increased nearly linearly with the board thickness.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
