Abstract
In order to alleviate energy shortage and maintain comfortable indoor environment, radiant air conditioning system is widely used. This paper designs and produces a miniaturized micro-holes radiant plate, which has the characteristics of orifice plate air supply and radiant heat transfer. The micro-holes radiant plate can be installation on the ceiling or sidewall without adding dynamics system and piping system. In order to explore the heating performance of the micro-holes radiant plate under different installation types, an experimental bench of air source heat pump micro-holes radiant plate heating system was built in Harbin, China, for laboratory heating. The experimental results showed that the indoor average temperature under various installation types could basically meet the set requirements, and the deviation was within 1 °C. The indoor horizontal temperature distribution was relatively uniform, and the temperature difference of each measuring point was less than 2 °C. The indoor vertical temperature difference was the smallest under the installation type with sidewall 50 mm from the ground at only 2.68 °C in the sitting position and 3.14 °C in the standing position, which meet China and ASHRAE standards. The ratio of the radiant heat transfer quantity under the sidewall heating was about 60 %, while the ratio under the ceiling heating was only about 30 %. The maximum ratio of the radiant heat transfer quantity was close to 70 % under the installation type with sidewall 50 mm from the ground. The experimental results provide theoretical support for the design and operation of air conditioning systems in severe cold regions.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
