Abstract

The microstructures of rock gradually evolve with changes in the external environment. This study focused on the microstructure evolution of glauberite and its weakening mechanism under different leaching conditions. The porosity were used as a characteristic index to study the effect of brine temperature and concentration on crack initiation and propagation in glauberite. The research subjects were specimens of ϕ3 × 10 mm cylindrical glauberite core, obtained from a bedded salt deposit buried more than 1000 m underground in the Yunying salt formation, China. The results showed that when the specimens were immersed in solution at low temperature, due to hydration impurities, cracks appeared spontaneously at the centre of the disc and the solution then penetrated the specimens via these cracks and dissolved the minerals around the crack lines. However, with an increase of temperature, the dissolution rate increased greatly, and crack nucleation and dissolved regions appeared simultaneously. When the specimens were immersed in a sodium chloride solution at the same concentration, the porosity s presented gradual upward trends with a rise in temperature, whereas, when the specimens were immersed in the sodium chloride solution at the same temperature, the porosity tended to decrease with the increase of sodium chloride concentration. In the process of leaching, the hydration of illite, montmorillonite, and the residual skeleton of glauberite led to the expansion of the specimen volume, thereby producing the cracks. The diameter expansion rate and the expansion velocity of the specimen increased with temperature increase, whereas, due to the common-ion effect, the porosity of the specimen decreases with the increase of sodium chloride solution concentration.

Highlights

  • Thermal-hydrological-chemical (THC) interactions are widely recognized and studied by researchers from different fields, including hydraulic engineering, civil engineering and geological environmental engineering [1,2,3,4,5]

  • In the area of underground mineral resource development using the method of leach mining, pore structure of geo-materials, solution temperature, and chemical reaction kinetics are the key factors

  • Processes 2018, 6, 99 reaction kinetics are the key factors to solution migration, solute diffusion and recovery efficiency

Read more

Summary

Introduction

Thermal-hydrological-chemical (THC) interactions are widely recognized and studied by researchers from different fields, including hydraulic engineering, civil engineering and geological environmental engineering [1,2,3,4,5]. In the area of underground mineral resource development using the method of leach mining, pore structure of geo-materials, solution temperature, and chemical reaction kinetics are the key factors. Processes 2018, 6, 99 reaction kinetics are the key factors to solution migration, solute diffusion and recovery efficiency [6,7,8,9,10,11]. Leach mining issolute the extraction useful minerals (elements or compounds) asextraction inorganic to solution migration, diffusionof and recovery efficiency. The method was first used for sodium chloride and copper are naturally dissolved in a leaching solution (water, chemical solvents, or microorganisms) [6,7,8].

Methods
Discussion
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.