Abstract
Mechanical and thermal damage to the bone tissue during drilling process is inevitable and directly affects the postoperative recovery. According to clinical practices and present academic investigations, this study tries to reduce bone damage by experimental investigation of bone drilling by Kirschner wire considering the drilling force and temperature factors. Finite element method has been applied to modelling of the drilling process. Then, grouped experiments have been carried out using bovine femoral bone and analyzed based on the orthogonal experimental method. The influence of key parameters such as Kirschner wire bevel angle, feed speed and rotational speed on the microscopic bone chip size, drilling force, drilling temperature and hole inlet burr was analyzed to conduct comprehensive analysis and optimizations. It is certain that the chips size is closely related to drilling force and drilling temperature. The low drilling temperature does not mean that the damage area is small. The drilling process should be completed quickly at high feed rates. The lower rotational speed, Kirschner wire bevel angle, and higher feed rate help reduce the thermal damage area of the bone drill, effectively reduce the drilling force and hole entrance burrs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.