Abstract
Objectives: To do the mechanical characterization of the composite developed by reinforcing the Grey Cast Iron (GCI) in AA6061. Methods/Statistical Analysis: An aging study was carried out on specimens of plain AA6061 matrix alloy and GCI reinforced AA6061 composite. Initially, samples were solution treated for 2 h at 5500C, then quenching in water followed by artificial aging at 1600C for different aging times. In the present study microstructure, hardness, tensile and impact properties of AA6061 based composite reinforced with GCI are analyzed as cast and in peak aged conditions. Findings: The presence of Grey Cast Iron in the matrix has resulted in improvement of the mechanical properties of the composite. The micrographs of the composite revealed a uniform distribution of the particles in the matrix. Comparison of the characteristics before and after heat treatment was done and it was found that there is an improvement in hardness, tensile strength of the composites as well as AA6061 alloy after heat treatment. It is found that the impact resistance reduces as the quantity of reinforcement is increased and also the cast specimens had better impact resistance than the peak aged category. Lowering of impact resistance is due to the loss of matrix ductility. Application/Improvements: The GCI reinforced particulate composites have been proved to be most suitable for heat and wear resistance applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
