Abstract
One of the technologies that can be used to meet energy needs is biomass combustion. In this study, the oil palm biomass fuels used were empty fruit bunches, oil palm fibers, oil palm midribs, and palm kernel shells. This research was carried out by a direct combustion method using a fluidized-bed combustor. The purpose of this experiment was to investigate the reaction of kinetics and the mechanism of combustion of oil palm biomass in fluidized-bed combustor. The characteristics observed in this test were the combustion temperature profile, flue-gas composition, and the composition of the ash-deposit chemical compound. The results of the experiments conducted showed that the best biomass combustion temperature profile was recorded at 2 kg biomass with an air flow rate of 0.9375 m3/s at 90.1%. The maximum temperature of biomass combustion recorded at biomass 3 kg with an air flow rate of 1.25 m3/s are 950oC (95%). The higher conversion combustion of biomass was found at biomass condition of 3 kg with an air flow rate of 0.9375 m3/s. The value of O2 emissions from biomass combustion shows that it was very small 0.2%. While the highest CO2 value was recorded at 19.9%. The highest combustion efficiency on FBC found 1 kg of biomass fuel with an air flow rate of 0.0654 m3/s recorded 94.9%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
