Abstract
In the current study, the primary components used are pumpkin seed oil biodiesel with diesel was tested in diesel engine and its performance, exhaust emissions, and its effects were observed. The pumpkin seed oil that is used to produce biodiesel undergoes transesterification process along with ethanol, sulphuricacid ,andNaOH catalysts . With blends like B0,B20,B40,B60,B80,and B100, the test on engine performance is obtained, and the reports exposed that, B40 is overlying blend among the other biodiesel blends. In addition, to enhance the performance characteristics of B20,B60,B80 by volume was combined with B40 blend. Due to lower heating characteristics of biodiesel, the observations of BTE for B40 is 4.6% lower than diesel. But the observations of BSFC for B40 is 7.3% higher than diesel. The heat emission rate ofB20,B40,andB60 are almost identical to diesel fuel ,apace with ,at higher loads B40 emitted37.5%less CO and NOx emission was raised at the rate of 95% when correlated to diesel fuel. However, It is observed that there is no major difference not much difference in the emissions (HC, NO, andCO) and characteristics of the engine when using the diesel fuel and Pumpkin seed biodiesel fuel blends.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Innovative Technology and Exploring Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.