Abstract
A pilot system was designed and constructed to evaluate reverse osmosis (RO) energy reduction that can be achieved using pressure-retarded osmosis (PRO). The RO-PRO experimental system is the first known system to utilize energy from a volume of water transferred from atmospheric pressure to elevated pressure across a semipermeable membrane to prepressurize RO feedwater. In other words, the system demonstrated that pressure could be exchanged between PRO and RO subsystems. Additionally, the first experimental power density data for a RO-PRO system is now available. Average experimental power densities for the RO-PRO system ranged from 1.1 to 2.3 W/m2. This is higher than previous river-to-sea PRO pilot systems (1.5 W/m2) and closer to the goal of 5 W/m2 that would make PRO an economically feasible technology. Furthermore, isolated PRO system testing was performed to evaluate PRO element performance with higher cross-flow velocities and power densities exceeding 8 W/m2 were achieved with a 28 g/L NaCl draw solution. From this empirical data, inferences for future system performance can be drawn that indicate future RO-PRO systems may reduce the specific energy requirements for desalination by ∼1 kWh/m3.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
