Experimental resininfiltrant with antibacterialactivity and ionic release

Considering the fact that resin infiltrants lack antibacterial activity, this study assessed the influence of the quaternary ammonium monomer dimethylaminohexadecyl methacrylate (DMAHDM) and amorphous calcium phosphate nanoparticles (NACP) on the physical and antibacterial properties of an experimental resin infiltrant (ERI). The following groups were established: ERI (75/25 wt.% TEGDMA/BISEMA), ERI + 2.5% DMAHDM (2.5DM), ERI + 5% DMAHDM (5DM), ERI + 2% NACP (NACP), ERI + 2.5% DMAHDM + 2% NACP (2.5DM_NACP), ERI + 5% DMAHDM + 2% NACP (5DM_NACP), and Icon® (IC), a commercial resin infiltrant. Degree of conversion (DC; n=4), sorption and solubility (SO/SOL; n=8), and contact angle (CA; n=10) tests were conducted. Biofilm biomass (BB; n=6) and bacterial metabolism (BM; n=8) were evaluated after Streptococcus mutans (UA159) cultivation for 48 h on material samples. Data were evaluated by one-way ANOVA and Tukey or Games-Howell post hoc tests (α=0.05). IC exhibited the highest DC, with no difference from 2.5DM and 5DM. IC showed the lowest CA. IC had the lowest SO, followed by ERI, which had the lowest SOL, with no difference from IC. 5DM_NACP showed the lowest biofilm biomass, similar to 2.5DM and 5DM. Resin infiltrants containing DMAHDM showed reduced bacterial metabolism. DMAHDM, with or without NACP, demonstrated significant antibacterial activity, while NACP impaired DC. Both DMAHDM and NACP increased the contact angle, sorption, and solubility of the resin infiltrant, which may affect the material's clinical performance.

Herein, we investigated a biointeractive tooth sealing material consisted of dimethylaminohexadecyl methacrylate (DMAHDM) and amorphous calcium phosphate nanoparticles (NACPs) to address the above issues simultaneously. Of note, 5% DMAHDM was incorporated into the resin blend, and 20% NACP was added to inorganic filler content of dental formulations intended as dental sealants. The sealing materials were used to seal human extracted teeth. The sealed teeth were subjected to an early childhood caries (ECC) key pathogen (Candida albicans and Streptococcus mutans) biofilm model using a dynamic caries tooth model (CDC reactor). The biofilm growth over the sealed teeth was assessed via colony-forming unit counting metabolic activity assays. The enamel surface hardness loss, degree of conversion, shear bond strength (SBS), and cytotoxicity were also investigated. Formulations having DMAHDM displayed antibacterial efficiency of 2.8-3.5 and 1.4-4.0 log inhibition for Streptococcus mutans and Candida albicans, respectively. Furthermore, the metabolic activity was reduced on the top of the sealed tooth with the biointeractive sealing materials (p < .05). The degree of conversion values was acceptable. The enamel surface hardness loss decreases (36 ± 9.8%) when in contact with the biointeractive tooth sealing material. The SBS of the combined formulation (5% DMAHDM + 20% NACP) was lower than commercial sealant but similar to experimental control. The investigated sealing material holds valuable dual antibacterial and antifungal activities associated with a reduced mineral loss against the cariogenic challenge promoted by ECC key pathogens.

Novel magnetic nanoparticle-containing adhesive with greater dentin bond strength and antibacterial and remineralizing capabilities

Novel low-shrinkage-stress bioactive nanocomposite with anti-biofilm and remineralization capabilities to inhibit caries

Concentration dependence of quaternary ammonium monomer on the design of high-performance bioactive composite for root caries restorations

Oral biofilm accumulation at the tooth–restoration interface often leads to recurrent dental caries and restoration failure. The objectives of this study were to: (1) develop a novel bioactive crown cement containing dimethylaminohexadecyl methacrylate (DMAHDM) and nano-sized amorphous calcium phosphate (NACP), and (2) investigate the mechanical properties, anti-biofilm activity, and calcium (Ca2+) and phosphate (PO43−) ion release of the crown cement for the first time. The cement matrix consisted of pyromellitic glycerol dimethacrylate and ethoxylated bisphenol-A dimethacrylate monomers and was denoted PEHB resin matrix. The following cements were tested: (1) RelyX luting cement (commercial control); (2) 55% PEHB + 45% glass fillers (experimental control); (3) 55% PEHB + 20% glass + 25% NACP + 0% DMAHDM; (4) 52% PEHB + 20% glass + 25% NACP + 3% DMAHDM; (5) 51% PEHB + 20% glass + 25% NACP + 4% DMAHDM; (6) 50% PEHB + 20% glass + 25% NACP + 5% DMAHDM. Mechanical properties and ion release were measured. Streptococcusmutans (S. mutans) biofilms were grown on cements, and colony-forming units (CFUs) and other biofilm properties were measured. The novel bioactive cement demonstrated strong antibacterial properties and high levels of Ca2+ and PO43− ion release to remineralize tooth lesions. Adding NACP and DMAHDM into the cement did not adversely affect the mechanical properties and dentin bonding strength. In conclusion, the novel NACP + DMAHDM crown cement has excellent potential for restoration cementation to inhibit caries by suppressing oral biofilm growth and increasing remineralization via Ca2+ and PO43− ions. The NACP + DMAHDM composition may have wide applicability to other biomaterials to promote hard-tissue formation and combat bacterial infection.

Antibacterial and remineralizing nanocomposite inhibit root caries biofilms and protect root dentin hardness at the margins

Testing mechanical properties and degree of conversion of resin-based composite material containing contact killing antibacterial agent in comparison with fluoride composite resin

Biofilm accumulation on the polymethyl methacrylate (PMMA) restorations negatively affect the prognosis of the provisional restorations or the following treatment. This study developed a novel antibacterial PMMA resin containing low concentration of dimethylaminohexadecyl methacrylate (DMAHDM). Four resins were tested: (1) PMMA resin (Control), (2) 1.25% DMAHDM, (3) 2.5% DMAHDM, (4) 5% DMAHDM. Adding 1.25% DMAHDM into the PMMA resin did not influence the mechanical properties, degree of conversion, monomer releasing, and color stability of the specimens (p > 0.05). The incorporation of DMAHDM into PMMA resin could greatly prevent saliva-derived biofilms adhesion compared with the control group (p < 0.05). The metabolism level of saliva-derived biofilms on the 1.25%, 2.5%, and 5% DMAHDM resins were reduced by 20%, 54%, and 62%, respectively. And the mechanism of DMAHDM disturbing the integrity of bacterial cell walls was confirmed by flow cytometric analysis. Adding 1.25% and 2.5% DMAHDM did not compromise cytocompatibility of the modified resin (p > 0.05). Therefore, novel PMMA resin containing low concentration DMAHDM is promising as a future antimicrobial provisional restoration material for preventing microbial-induced complications in clinical settings.Graphical abstract

Novel low-shrinkage-stress nanocomposite with remineralization and antibacterial abilities to protect marginal enamel under biofilm

Novel pit and fissure sealant containing nano-CaF2 and dimethylaminohexadecyl methacrylate with double benefits of fluoride release and antibacterial function

Bonding durability, antibacterial activity and biofilm pH of novel adhesive containing antibacterial monomer and nanoparticles of amorphous calcium phosphate

Novel bioactive root canal sealer to inhibit endodontic multispecies biofilms with remineralizing calcium phosphate ions

Novel bioactive root canal sealer with antibiofilm and remineralization properties

(1) Background: The objective of this study was to develop a novel dental nanocomposite containing dimethylaminohexadecyl methacrylate (DMAHDM), 2-methacryloyloxyethyl phosphorylcholine (MPC), and nanoparticles of calcium fluoride (nCaF2) for preventing recurrent caries via antibacterial, protein repellent and fluoride releasing capabilities. (2) Methods: Composites were made by adding 3% MPC, 3% DMAHDM and 15% nCaF2 into bisphenol A glycidyl dimethacrylate (Bis-GMA) and triethylene glycol dimethacrylate (TEGDMA) (denoted BT). Calcium and fluoride ion releases were evaluated. Biofilms of human saliva were assessed. (3) Results: nCaF2+DMAHDM+MPC composite had the lowest biofilm colony forming units (CFU) and the greatest ion release; however, its mechanical properties were lower than commercial control composite (p < 0.05). nCaF2+DMAHDM composite had similarly potent biofilm reduction, with mechanical properties matching commercial control composite (p > 0.05). Fluoride and calcium ion releases from nCaF2+DMAHDM were much more than commercial composite. Biofilm CFU on composite was reduced by 4 logs (n = 9, p < 0.05). Biofilm metabolic activity and lactic acid were also substantially reduced by nCaF2+DMAHDM, compared to commercial control composite (p < 0.05). (4) Conclusions: The novel nanocomposite nCaF2+DMAHDM achieved strong antibacterial and ion release capabilities, without compromising the mechanical properties. This bioactive nanocomposite is promising to reduce biofilm acid production, inhibit recurrent caries, and increase restoration longevity.