Abstract
The traditional cold-formed thin-walled (CFTW) steel sheathed walls are prone to have misalignment at the joints of wall panels and the damage of self-tapping screw connections under earthquake, resulting in obvious pinching of the hysteretic curves. In order to improve the energy dissipation and shear bearing capacity of the lateral resisting member in CFTW steel structures, an innovative structure called CFTW steel structure with braced ductile shear panel (CFTW-BSP) was proposed in this paper. Four full-scale one-story one-bay CFTW-BSP specimens containing two X-shaped and two K-shaped brace specimens were designed and tested under horizontal cyclic loads. The effects of configuration types, shear panel aspect ratios and slotted holes were investigated by comparing the lateral performance. In addition, the replaceability of the shear panel damper was analyzed. In general, the specimens performed well with a stable and plump energy dissipation capacity. The plastic deformation concentrated on the shear panel before 2% interstory drift, and then the end stud bases yielded and cracks propagated near the hold-downs at the ultimate stage. The braces always remained elastic during the tests. For X-shaped brace specimens, the slotted holes on shear panel can improve the ductility but decrease the energy dissipation capacity of the structure. For K-shaped brace specimens, the lateral resistance of the structure can be improved by decreasing the shear panel aspect ratio.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.