Abstract

The turbulent convective heat transfer behavior of alumina (Al2O3) and zirconia (ZrO2) nanoparticle dispersions in water is investigated experimentally in a flow loop with a horizontal tube test section at various flow rates (9000<Re<63,000), temperatures (21–76°C), heat fluxes (up to ∼190kW∕m2), and particle concentrations (0.9–3.6vol% and 0.2–0.9vol% for Al2O3 and ZrO2, respectively). The experimental data are compared to predictions made using the traditional single-phase convective heat transfer and viscous pressure loss correlations for fully developed turbulent flow, Dittus–Boelter, and Blasius/MacAdams, respectively. It is shown that if the measured temperature- and loading-dependent thermal conductivities and viscosities of the nanofluids are used in calculating the Reynolds, Prandtl, and Nusselt numbers, the existing correlations accurately reproduce the convective heat transfer and viscous pressure loss behavior in tubes. Therefore, no abnormal heat transfer enhancement was observed in this study.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.