Abstract
Drilling in deeper formations and in high pressure and high temperature (HPHT) environments is a new frontier for the oil industry. Fifty years ago, no one would have imagined drilling in more than 10,000 feet of water depth like we do today. However, more issues need to be researched, tested, and studied in order to maintain a good drilling efficiency as deeper depths are drilled. One of these issues is the great effect that drilling at HPHT conditions has on the behavior of drilling fluids. The goal of this research was to study fluid loss properties of water based mud and its effect on permeability under HPHT dynamic conditions utilizing advanced laboratory equipment that allows for wide ranges of pressure and temperature. Filtration tests were performed at both ambient and HPHT conditions. After several laboratory evaluations of fluid loss additives available in the market, Polysal HT was found to be the most effective in reducing the fluid loss of the water based mud for both static and dynamic tests at HPHT conditions. It is economically designed to be saturated in salt and other brine system. An additive that encapsulates particles with protective polymer coating as colloid. Drilling fluid stabilizer especially in drilling hydratable shale and a remarkable effectiveness in wide range make up water (high saline and high hardness). The fluid loss behavior of the mud and the characteristics of the filter cake produced are the basic factors that need to be considered when determining mud treatment. A detailed workflow of experiments using equipment from OFITE HPHT Fluid Apparatus with differential pressure of 500 psi under 230°F with 2.5” filter paper (30 minutes) as well as OFITE Permeable Plugging Tester with 1,200 psi differential pressure @ 230°F using a ceramic disc were conducted. Also tests were conducted using the Low Temperature- Low Pressure API Filter Press at 100 psi @77°F with 3.5” filter paper for the purpose of comparison. Key words: Permeability; Fluid loss; Water based mud; High pressure high temperature
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
