Abstract

Solid-gas coupling coal-like materials are essential for simulating coal and gas outbursts and the long-term safety study of CO2 sequestration in coal. However, reported materials still differ substantially from natural coal in mechanical, deformation and gaseous properties; the latter two aspects are common not considered. There is a lack of a definite and quantitative preparation method of coal-like materials with high similarity for future reference. Here, 25 groups of raw material ratios were designed in the orthogonal experiment using uniaxial compression, shearing and adsorption/desorption tests. Experiment results indicated that the coal-like materials were highly similar to soft coals in properties mentioned above. And range analysis revealed the key influencing factors of each mechanical index. The gypsum/petrolatum ratio controls the density, compressive strength, elastic modulus, cohesion and deformation characteristic. The coarse/fine coal powder (1–2 and 0–0.5 mm) controls the internal friction angle and is the secondary controlling factor for compressive strength and elastic modulus. The effect of coal particle size on the sample strength was studied using scanning electron microscope (SEM). When the gypsum/petrolatum ratio increased, the deformation characteristics changed from ductile to brittle. The different failure modes in the samples were revealed. The coal powder content is a key in the gas adsorption/desorption properties and an empirical formula for estimating the adsorption capacity was established. Based on the range analysis of experimental results, a multiple linear regression model of the mechanical parameters and their key influencing factors was obtained. Finally, a composition closely resembling the natural coal was determined, which differs by only 0.47–7.41% in all parameters except porosity (11.76%). Possible improvements and extension to similar materials are discussed. The findings of this study can help for better understanding of coal and gas outburst mechanism and stability of CO2 sequestration in soft coal seams.

Highlights

  • Coal and gas outburst accidents are among the most serious disasters affecting coal mining [1,2,3,4]and a problem in almost all major coal-producing countries [2,3,4]

  • We propose a systematic and quantitative development method to determine a solid-gas coupling coal-like material that could closely resemble given natural coal in the mechanical properties, adsorption/desorption features and deformation characteristics

  • Solid-gas coupling coal-like materials were developed according to the characteristics of low strength, strong plastic deformation and large gas adsorption capacities of natural tectonically deformed coal (TDC)

Read more

Summary

Introduction

Coal and gas outburst accidents are among the most serious disasters affecting coal mining [1,2,3,4]and a problem in almost all major coal-producing countries [2,3,4]. Processes 2019, 7, 155 fast rate from the coal rock seam to the mining space in a very short period of time (a few seconds to a few minutes). Such outbursts could destroy underground facilities, damage the ventilation system, cause a large number of casualties and even induce secondary accidents such as gas burning or explosion [2,4,5,6,7]. Simulation tests have been rapidly developed and used to explore the mechanism and process of coal and gas outbursts [5,9,11,12,13,14,15]. The development of similar solid-gas coupling coal-like materials in the lab is indispensable for studying the mechanism of coal and gas outbursts

Methods
Results
Discussion
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.