Abstract
Induction control methods offer a potential solution to minimizing wake effects that occur in large wind farms. This paper presents an experimental study on multiple induction control methods for wind farm power maximization. Wind tunnel experiments were conducted on two aligned scaled wind turbines. The upstream turbine was operated with static induction control, periodic dynamic induction control with collective pitch actuation, and dynamic individual pitch control (the helix approach). All wind farm control implementations were compared to a baseline case, which optimized the individual power extraction of both turbines. Tomographic particle image velocimetry was used to measure the wake of the upstream turbine. Based on turbine measurements, grid searches were employed to discover the optimal frequency and amplitude of the pitch actuation in the dynamic induction control cases. While static induction control showed increased wake velocities in the near wake, it did not provide an overall increase in power production of the two-turbine array. Dynamic induction control methods, especially the helix approach in the counterclockwise direction, were seen to significantly increase the total power output compared to the baseline control case. However, this improvement came with a larger amount of pitch actuation and increased fatigue loading of structural components in the fore-aft direction.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
