Abstract
Scroll expanders are widely adopted in small-scale Organic-Rankine-Cycles-(ORCs)-units integrated with renewable energy sources for low power residential Combined Heat and Power Production (CHP). These expanders are often connected to variable direct loads without the possibility to impose its speed externally. Despite the effect of electric load variation on expander speed is known, a minor attention is focused on its impact on the plant operability and regulation. To fill this gap, a wide experimental analysis is carried out on a solar micro-cogenerative ORC-based power unit equipped with a 1 kW hermetic scroll expander connected with a variable electric load. The experimental behaviour of the ORC-unit was assessed for different values of load resistance (from 20 Ω up to 80 Ω). Results show that properly acting on the load resistance the ORC-power unit can be improved up to 50 % in terms of efficiency and power production. Moreover, if the expander is properly designed its self-regulatory capability allows to achieve similar performance of an equivalent speed-controlled expander tested on the same plant. Finally, a new theoretical model reproducing the impact of main operating quantities on expander behaviour was developed and experimentally validated paving the way to a novel model-based control approach.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.