Abstract
In this work, the bending fatigue strengths of injection-molded symmetric and asymmetric nylon 66 gears were evaluated experimentally, and the results were substantiated using numerical studies. The symmetric (20°/20°) and asymmetric (34°/20° and 20°/34°) configurations were subjected to bending fatigue tests under a load controlled mode. The bending stresses of the symmetric and asymmetric gears were predicted by quasi-static simulations using a commercial finite element analysis software. The form factor ([Formula: see text]) and the stress correction factor ([Formula: see text]) were computed using an adapted ISO method. The 34°/20° configuration exhibited the lowest bending stress and highest bending fatigue life among the tested configurations. The form factor exerted a decisive influence on the magnitude of the bending stress compared to the stress correction factor. For the considered loading conditions, deflection-induced load sharing occurred in the 20°/20° and 20°/34° configurations but was absent in the 34°/20° configuration. Failure analysis indicated that a high stress concentration caused multiple cracks in the fillets of asymmetric gears.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
