Abstract
In this study, the explosive behavior of syngas/air mixtures was investigated numerically in a 3-D cylindrical geometric model, using ANSYS Fluent. A chamber with the same dimensions as the geometry in the simulation was used to investigate the explosion process experimentally. The outcome was in good agreement with experimental results for most equivalence ratios at atmospheric pressure, while discrepancies were observed for very rich mixtures (ϕ > 2.0) and at elevated pressure conditions. Both the experimental and simulated results showed that for syngas/air mixture, the maximum explosion pressure increased from lean (ϕ = 0.8) to an equivalence ratio of 1.2, then decreased significantly with richer mixtures, indicating that maximum explosion pressure occurred at the equivalence ratio of 1.2, while explosion time was shortest at an equivalence ratio of 1.6. Increasing H2 content in the fuel blends significantly raised laminar burning velocity and shortened the explosion time, thereby increasing the maximum rate of pressure rise and deflagration index. Normalized peak pressure, the maximum rate of pressure rise and the deflagration index were sensitive to the initial pressure of the mixture, showing that they increased significantly with increased initial pressure.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
