Abstract
The evaporation behavior of phosphorus in molten silicon during electron beam irradiation was investigated with the aim of producing solar grade silicon (SOG-Si) from metallurgical grade silicon (MG-Si) by a sequential metallurgical process. Batch experiments showed that the evaporation rate of phosphorus increased in proportion to the power of the electron beam and phosphorus content. The phosphorus removal rate was controlled by free evaporation from the molten silicon surface. Electron beam irradiation makes it possible to secure a higher temperature at the free liquid surface, which results in more efficient dephosphorization. A continuous flow experiment indicated that the phosphorus concentration at the outlet increased when the silicon feed rate was raised, which was attributed to the fact that the hearth residence time of the molten silicon was proportionally shorter. Thus, the flow of molten silicon in the hearth did not behave as a complete mixed reactor flow type reaction, but was close to a plug flow type reaction. With a 150 kg scale pilot manufacturing plant, MG-Si containing about 25 mass ppm of phosphorus was successfully purified to P < 0.1 mass ppm.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
