Abstract
Titanium (Ti)-based implants play a significant role in rigid internal fixation in maxillofacial surgery. No study has reported that three-dimensional-printed Ti alloy plates (3D-Ti plates) have comprehensively excellent properties similar to standard plates (Matrix-MANDIBLE, SYNTHES, Switzerland) (Synthes-Ti plates). In this work, we manufactured 3D-Ti plates by selective laser melting with Ti6Al4V powder. The surface morphology, mechanical properties, and bone-plate contact rate of the 3D-Ti plates and the Synthes-Ti plates were characterized and compared via electron microscopy, atomic force microscopy, Vickers hardness test, three-point bending test, and software calculation. Human bone marrow stromal cells (HBMSCs) were cultured on the plates to test their biocompatibility. Importantly, the 3D-Ti plates were placed into a mandibular fracture model to assess the effect of medical application for 4 and 24 weeks. The 3D-Ti plates were demonstrated to have similar biocompatibility and stability for rigid internal fixation with the Synthes-Ti plates, lower roughness (106.44 ± 78.35 nm), better mechanical strength (370.78 ± 1.25 HV10), and a higher bone-plate contact rate (96.9%). These promising results indicate the feasibility of using 3D-Ti plates for irregular shapes and complex anatomical structures in a clinical context.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
