Abstract
ObjectivesChitosan (CTS) has been a popular option for scaffold fabrication because of its biocompatibility, biodegradability, antimicrobial and nonimmunogenic effects. However, it is of limited function, due to its low mechanical strength and its solubility in acidified media. These limitations could be overcome by its blending with PVA and incorporation with bioactive materials to improve its mechanical properties and tissue regeneration capability. MethodsCarbon based nanomaterials, such as graphene oxide (GO) incorporated with CTS/PVA blend to improve composite-scaffold stability. GO nanoparticles were chemically prepared and fully characterized. Different concentrations of both CTS and nano-GO were used for the fabrication of CTS/PVA/GO nanocomposite films through the solvent-casting method. The mechanical properties, thermal stability biodegradation, and swelling of the nanocomposite films were evaluated after characterization by XRD, FTIR and SEM, to detect the effect of GO incorporation in the scaffold to select the suitable dental application. ResultsA better performance was observed in thermal stability, biodegradation, and water resistance after GO addition into CTS/PVA scaffolds. Regarding mechanical properties, groups were assessed by Kruskal Wallis test afterward Dunn’s post hoc test. There was no significant difference in tensile strength between the nanocomposite films of CTS (2%) and CTS (3%). The tensile strength decreased after addition of nano-GO at different concentrations. The elastic modulus significantly increased when (1%) GO was added into the 1CTS (2%):1PVA. ConclusionsCTS/PVA/GO nanocomposite can be used in dental hard tissue engineering, as the incorporation of GO into the CTS/PVA polymer blend improves its properties which is regarded as the critical concentrations of CTS and GO.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.