Evaluation of the applicability of carbon-based materials for arsenic removal from flue gases

Abstract

Arsenic is an highly toxic element which may be released into the atmosphere during the combustion of solid fuels. This paper verifies the possibility of using char from tires CT and lignite dust LD as materials for the adsorption of gaseous forms of As. The source of the gaseous forms of arsenic was coal combustion under laboratory conditions. Adsorption tests included both different sorbent bed temperatures (120–180°C) and various flue gas compositions (resulting from the combustion of bituminous and lignite coals). It was shown that sorption temperature did not affect the arsenic removal efficiency for both analysed sorbents. The average As removal efficiency for tire char and lignite dust was 88 and 92%, respectively. The composition of the burned coal, and thus the composition of the flue gas, significantly influences the efficiency of Asgas adsorption. While for LD the level of As removal was still high (more the 90%), the sorption of Asgas by tire char from the flue gas when lignite was burned was less effective (the efficiency was below 80%). It was additionally indicated via a leachability test that "used" CT could be safely disposed of while LD would require appropriate management. Based on the comparison of the performance of CT and LD with commercial AC activated carbon and the differences in their market price, it can be concluded that the studied alternative sorbents are competitive with AC.