Abstract
The effectiveness of alkali, acid and chlorite pretreatment of lignocellulosic feedstocks for improving the enzymatic saccharification of cellulose has been evaluated. The feedstocks such as Corncob, Prosopis juliflora and Lantana camara were pretreated with varied concentration of sulfuric acid, sodium hydroxide and sodium chlorite at 121 °C for 15–60 min. Among different methods used, chlorite pretreatment removed maximum lignin with ∼90% (w/w) residual holocellulose content in all the substrates tested. Moreover, irrespective of the substrates used, the chlorite treated substrates were enzymatically saccharified from 86.4% to 92.5% (w/w). While, the alkali treated substrates containing 66.0–76.0% (w/w) holocellulose could be enzymatically saccharified up to 55% (w/w). The acid pretreated substrates were found to contain almost 54–62% (w/w) holocellulose, which on enzymatic hydrolysis could result in 39.5–48% (w/w) saccharification.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.