Abstract
In this article, the results of a laboratory study performed on the PMSS mixture containing ceramic waste powder (CWP) as a filler substitute compared to asphalt prepared with mineral aggregate powder (MAP) were presented. The tests performed were; wet cohesion test, wet-track abrasion test, loaded wheel test-displacement and loaded wheel test-sand adhesion. The above mentioned tests were conducted in five groups of PMSS mixture containing 10% MAP, 7.5% MAP + 2.5% CWP, 5% MAP + 5% CWP, 2.5% MAP + 7.5% CWP and 10% CWP based on total aggregate weight. The experiments results clearly exhibited that the samples containing CWP were well compatible with the bitumen emulsion and improved the performance of PMSS mixture. On average, the performance of PMSS mixture containing 10% CWP in cohesion, abrasion resistance, displacement resistance and bleeding reduction was 33.3, 62.0, 41.3 and 31% higher than the control mixture, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
