Abstract
This study demonstrated the use of batch bioreactor experiments as an evaluation tool to determine appropriate influent medium composition and concentration for effective startup of an upflow anaerobic sludge blanket (UASB) reactor. Using seed sludge from a domestic treatment plant, the weight ratio of glucose and volatile fatty acids (VFA) present in the influent synthetic medium was varied and the batch performance was assessed in terms of pH variation during the course of the experiment, chemical oxygen demand (COD) reduction, specific substrate uptake rates, methanogenic activity, and methane yield. The performance was also evaluated by increasing the concentration of influent COD. Medium composition with glucose to VFA weight ratio at or below 2:8 and COD concentration at 11g∕L was determined to be optimum for effective startup of the UASB reactors. Utilization of the optimized influent medium provided a pH variation from 6.5 to 7.8 over the length of the UASB reactor and resulted in granule formation, high methanogenic activity, and methane yield. The evaluation method provided a practical approach to determine the applicability of seed sludge from a particular source and the desired influent characteristics for reduced startup duration in UASB processes.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
